OEM GOST 721-32-10530 721-32-10K70 721-32-15150 721-33-20042 721-33-20080 95932540 95932140 95932840 Ak3573 721-32-10d10 721-32-10c10 Hydraulic Accumulator
OEM GOST 721-32-10530 721-32-10K70 721-32-15150 721-33-20042 721-33-20080 95932540 95932140 95932840 Ak3573 721-32-10d10 721-32-10c10 Hydraulic Accumulator

OEM GOST 721-32-10530 721-32-10K70 721-32-15150 721-33-20042 721-33-20080 95932540 95932140 95932840 Ak3573 721-32-10d10 721-32-10c10 Hydraulic Accumulator

குறைந்த ஆர்டர் அளவு:
1 Piece
பொருளின் முறை:
快递, 空运, 陆运, 海运
விவரங்களுக்கு கிளிக் செய்க:
பொருள் விவரங்கள்
செம்மொழிகள்
முக்கிய விவரங்கள்
குறைந்த ஆர்டர் அளவு:1 Piece
பொருளின் முறை:快递, 空运, 陆运, 海运
பொருள் விளக்கம்
Product Introduction:
The OEM GOST 721-32-10530 721-32-10K70 721-32-15150 721-33-20042 721-33-20080 95932540 95932140 95932040 is a premium-quality axial piston pump series manufactured in strict compliance with Russian GOST standards and international ISO specifications. This high-performance hydraulic pump is engineered for heavy-duty industrial applications requiring reliable fluid power transmission under demanding operating conditions.
Product Features and Performance:
• High-efficiency axial piston design with swashplate variable displacement mechanism providing precise flow control and excellent volumetric efficiency (≥94%)
• Advanced hydrostatic bearing technology ensuring smooth operation, minimal noise levels (≤75 dB(A) at rated speed), and extended service life exceeding 15,000 operating hours
• Robust cast iron housing with precision-machined internal components (HRC 58-62 hardness) delivering superior wear resistance and dimensional stability
• Wide displacement range (16-250 cc/rev depending on model) accommodating diverse system requirements from compact to high-flow applications
• Maximum working pressure up to 31.5 MPa (4500 PSI) with peak pressure capability of 40 MPa for short-duration overload conditions
• Integrated pressure compensation and load-sensing capabilities enabling energy-efficient operation and reduced system heat generation
• Multiple port configurations (SAE flange, threaded, or custom) facilitating flexible system integration
Quality Control and Testing Process:
Each unit undergoes comprehensive quality assurance protocols including: precision dimensional inspection using CMM equipment verifying all critical tolerances within ±0.005mm, material composition analysis via spectrometry confirming compliance with GOST and ASTM standards, hardness testing (HRC 58-62 for pistons/cylinder blocks), surface finish measurement (Ra ≤0.2μm for critical sliding surfaces), hydrostatic pressure testing at 1.5x rated pressure for minimum 60 minutes duration, volumetric efficiency testing across full operating range (20%-100% displacement), mechanical efficiency validation under varying load conditions, noise and vibration testing per ISO 4412 standards, temperature rise verification under continuous full-load operation, and complete functional performance certification. All manufacturing processes comply with ISO 9001:2015 quality management systems with full traceability documentation including material certificates, test reports, and inspection records.
Application Scenarios and Industries:
Primary applications encompass: heavy-duty construction machinery (excavators, loaders, bulldozers, cranes), industrial manufacturing equipment (press machines, injection molding machines, metal forming presses), mining and mineral processing equipment (drilling rigs, crushers, conveyor systems), marine and offshore applications (winch systems, deck machinery, steering gear), agricultural machinery (large tractors, harvesters, irrigation pumps), energy sector equipment (wind turbine hydraulic systems, hydroelectric power units), railway maintenance machinery, and metallurgical industry equipment (rolling mills, continuous casting machines). Suitable for both new equipment manufacturing and replacement/retrofit applications requiring GOST-certified hydraulic components.
Operation and Maintenance Guidelines:
Recommended operational procedures: conduct daily visual inspections before startup checking for external leaks, connection looseness, or unusual noises; verify hydraulic oil level weekly maintaining proper level within sight gauge range; replace hydraulic filters per manufacturer specifications (typically every 1000 operating hours or 6 months) using genuine filter elements with β₁₀≥75 rating; monitor operating temperature continuously keeping within recommended range (35-65°C optimal, maximum 80°C); check oil condition regularly via laboratory analysis every 6 months or 2000 hours; inspect shaft seals and case drain lines monthly replacing seals immediately if leakage detected; follow proper break-in procedure for new installations (operate at ≤50% rated pressure for first 50 hours); use only manufacturer-approved hydraulic fluids meeting ISO VG 46 or VG 68 specifications with appropriate anti-wear additives; adhere to specified torque values for port connections (SAE ports: 150-200 Nm depending on size); maintain proper reservoir breather and filtration to ensure fluid cleanliness at ISO 4406 code 17/15/12 or better.
MKS Hydraulic Advantages:
✓ Premium Quality Assurance: Manufactured using top-grade alloy materials imported from certified suppliers; every unit undergoes 100% functional testing before shipment with complete GOST-R certification and ISO 9001:2015 compliance documentation provided
✓ Professional After-Sales Support: Experienced multilingual technical team available 24/7 providing comprehensive application engineering support, detailed installation guidance with video tutorials, remote diagnostic assistance, and guaranteed spare parts availability for minimum 20 years after production
✓ Reliable Delivery Commitment: Standard production lead time 15-25 business days depending on model and quantity; expedited shipping available (7-10 days air freight) for urgent requirements; worldwide distribution network covering Russia/CIS region, Southeast Asia, Middle East, Africa, and South America
✓ Comprehensive Warranty Protection: 18-month warranty from delivery date covering all manufacturing defects with free replacement policy including shipping costs; extended warranty options up to 36 months available at additional cost; warranty claims processed within 48 hours with loaner units available for critical downtime situations
✓ Custom Engineering Capabilities: Full OEM/ODM services available including custom displacements for special applications, alternative port configurations, shaft modifications for specific coupling requirements, dual-pressure ratings for multi-system applications, and complete hydraulic system design support with CAD/CFD analysis capabilities

சிறப்பான தயாரிப்புகள்

சீரானது: மின்சார சாதனங்களின் தொகுப்பு.
உங்கள் தகவலை விட்டுவிட்டு
நாங்கள் உங்களைத் தொடர்புகொள்வோம்.
தொலைபேசி
WhatsApp
WeChat