Detalhes essenciais
MOQ:1 Piece
Envio:快递, 空运, 陆运, 海运
Introdução do Produto
Product Introduction:
The in Stock Excavator Machine Spare Part Gft9t22097 Travel Hydraulic Motor Assembly represents MKS Hydraulic's premium solution for excavator propulsion systems. This high-performance travel motor is specifically engineered as a direct replacement for major excavator brands, delivering exceptional reliability and power transmission efficiency in demanding construction and mining applications.
Product Features & Performance Characteristics:
1. Advanced Piston Design: Utilizing state-of-the-art axial piston technology with optimized swash plate angles, ensuring smooth operation and maximum torque output across all speed ranges.
2. Integrated Planetary Gearbox: Features a robust planetary reduction gear system integrated within the motor housing, providing high torque multiplication while maintaining compact dimensions ideal for excavator undercarriage installation.
3. Superior Sealing Technology: Incorporates triple-seal protection including mechanical face seals, oil seals, and dust exclusion rings, preventing contamination ingress even in harsh operating environments with mud, dust, and water exposure.
4. High Pressure Capability: Rated for continuous operation at pressures up to 350 bar (5,076 PSI) with peak pressure tolerance of 450 bar, suitable for heavy-duty excavation and earthmoving tasks.
5. Precision Machined Components: All critical components manufactured to ISO 2768-mk tolerances, ensuring perfect fitment and extended service life compared to aftermarket alternatives.
6. Thermal Efficiency: Optimized internal flow paths and cooling fins design minimize heat buildup during prolonged operation, maintaining consistent performance in ambient temperatures from -20°C to +50°C.
Quality Control & Testing Procedures:
Every Gft9t22097 Travel Hydraulic Motor Assembly undergoes MKS Hydraulic's rigorous quality assurance protocol:
1. Incoming Material Inspection: Spectrometric analysis of cast iron and steel components verifying chemical composition; hardness testing confirming HRC 58-62 for critical wear surfaces.
2. Dimensional Verification: Coordinate Measuring Machine (CMM) inspection of housing bores, shaft diameters, and mounting interfaces ensuring ±0.01mm accuracy.
3. Assembly Process Control: Clean-room environment (ISO Class 7) assembly with torque-controlled fastening and precision shimming for optimal gear mesh patterns.
4. Bench Testing Protocol:
- No-load run-in: 30 minutes at varying speeds
- Pressure testing: 4 hours at rated pressure monitoring flow, temperature, noise
- Leakage test: Static pressure hold at 1.25× rated pressure for 15 minutes
- Efficiency mapping: Volumetric and mechanical efficiency curves documented
- No-load run-in: 30 minutes at varying speeds
- Pressure testing: 4 hours at rated pressure monitoring flow, temperature, noise
- Leakage test: Static pressure hold at 1.25× rated pressure for 15 minutes
- Efficiency mapping: Volumetric and mechanical efficiency curves documented
5. Endurance Validation: Random sample units complete 1500-hour accelerated life test simulating excavator duty cycles including forward/reverse operation, load variations, and thermal cycling.
6. Final Audit: Visual inspection, dimensional verification, functional test certificate generation, and protective coating application before packaging.
Application Scenarios & Industries:
The Gft9t22097 Travel Hydraulic Motor serves critical applications across multiple sectors:
1. Construction Equipment: Mini excavators (1.5-6 ton class), crawler loaders, compact track loaders, skid steer loaders
2. Mining Operations: Underground mining equipment, surface mining auxiliary machinery, tunnel boring machine components
3. Agriculture: Tractor-mounted implements, harvesters, irrigation system drives
4. Material Handling: Telehandlers, rough terrain forklifts, container handling equipment
5. Marine & Dockyard: Deck machinery, shipyard cranes, dredging equipment
6. Forestry Equipment: Feller bunchers, forwarders, wood chippers
7. Municipal Services: Road maintenance machines, snow removal equipment, utility vehicles
2. Mining Operations: Underground mining equipment, surface mining auxiliary machinery, tunnel boring machine components
3. Agriculture: Tractor-mounted implements, harvesters, irrigation system drives
4. Material Handling: Telehandlers, rough terrain forklifts, container handling equipment
5. Marine & Dockyard: Deck machinery, shipyard cranes, dredging equipment
6. Forestry Equipment: Feller bunchers, forwarders, wood chippers
7. Municipal Services: Road maintenance machines, snow removal equipment, utility vehicles
Usage & Maintenance Guidelines:
Installation Requirements:
- Verify motor model compatibility with original equipment specifications
- Ensure mounting surface cleanliness and flatness within 0.05mm/m
- Apply specified torque values to mounting bolts using calibrated torque wrench
- Connect hydraulic lines per schematic: A port (advance), B port (reverse), drain port (case)
- Use recommended hydraulic fluid: ISO VG 46 or VG 68 anti-wear hydraulic oil
- Verify motor model compatibility with original equipment specifications
- Ensure mounting surface cleanliness and flatness within 0.05mm/m
- Apply specified torque values to mounting bolts using calibrated torque wrench
- Connect hydraulic lines per schematic: A port (advance), B port (reverse), drain port (case)
- Use recommended hydraulic fluid: ISO VG 46 or VG 68 anti-wear hydraulic oil
Initial Start-up Procedure:
- Pre-fill motor casing through drain port with clean hydraulic oil before connection
- Bleed air from system by idling engine and slowly actuating travel levers
- Check for external leaks at all connections during low-pressure operation
- Gradually increase load over first 2 hours of operation (break-in period)
- Pre-fill motor casing through drain port with clean hydraulic oil before connection
- Bleed air from system by idling engine and slowly actuating travel levers
- Check for external leaks at all connections during low-pressure operation
- Gradually increase load over first 2 hours of operation (break-in period)
Routine Maintenance Schedule:
- Daily: Visual inspection for leaks, check oil level in closed-loop system
- Weekly: Monitor operating temperature, listen for abnormal noises
- Monthly: Inspect drain line for excessive flow indicating internal seal wear
- Quarterly: Replace hydraulic filters, sample oil for contamination analysis
- Annually: Comprehensive teardown inspection if operating hours exceed 2000/year
- Daily: Visual inspection for leaks, check oil level in closed-loop system
- Weekly: Monitor operating temperature, listen for abnormal noises
- Monthly: Inspect drain line for excessive flow indicating internal seal wear
- Quarterly: Replace hydraulic filters, sample oil for contamination analysis
- Annually: Comprehensive teardown inspection if operating hours exceed 2000/year
Common Troubleshooting Issues:
- Low speed/insufficient torque: Check charge pump pressure, inspect relief valve setting
- External leakage: Replace shaft seals or housing gaskets, check shaft alignment
- Overheating: Verify adequate case drain flow, review cooling system operation
- Abnormal noise: Investigate bearing condition, check for cavitation in suction line
- Erratic operation: Test control valve function, verify solenoid operation if equipped
- Low speed/insufficient torque: Check charge pump pressure, inspect relief valve setting
- External leakage: Replace shaft seals or housing gaskets, check shaft alignment
- Overheating: Verify adequate case drain flow, review cooling system operation
- Abnormal noise: Investigate bearing condition, check for cavitation in suction line
- Erratic operation: Test control valve function, verify solenoid operation if equipped
MKS Hydraulic Advantages:
Why Choose MKS Hydraulic for Your Travel Motor Needs?
1. Uncompromising Quality Commitment:
- ISO 9001:2015 and ISO 14001:2015 certified manufacturing facility
- 100% raw material traceability via batch numbering system
- Premium alloy steels sourced from certified specialty steel mills
- Zero-defect manufacturing philosophy with continuous improvement culture
- Every unit ships with comprehensive test report and certificate of conformance
- ISO 9001:2015 and ISO 14001:2015 certified manufacturing facility
- 100% raw material traceability via batch numbering system
- Premium alloy steels sourced from certified specialty steel mills
- Zero-defect manufacturing philosophy with continuous improvement culture
- Every unit ships with comprehensive test report and certificate of conformance
2. Exceptional After-Sales Service:
- 24/7 multilingual technical support hotline staffed by experienced hydraulic engineers
- Global distribution network with regional warehouses in Asia, Europe, Americas, Middle East
- Guaranteed response time: <4 hours for technical inquiries, <24 hours for parts dispatch
- Free application engineering consultation including sizing calculations and system integration guidance
- Online troubleshooting database with video tutorials and exploded-view diagrams
- On-site service technician deployment available for complex installations
- 24/7 multilingual technical support hotline staffed by experienced hydraulic engineers
- Global distribution network with regional warehouses in Asia, Europe, Americas, Middle East
- Guaranteed response time: <4 hours for technical inquiries, <24 hours for parts dispatch
- Free application engineering consultation including sizing calculations and system integration guidance
- Online troubleshooting database with video tutorials and exploded-view diagrams
- On-site service technician deployment available for complex installations
3. Reliable Delivery Performance:
- Standard models: 3-5 business days from order confirmation to shipment
- Express shipping option: 48-hour air freight delivery for emergency breakdown situations
- Real-time order tracking accessible through customer web portal
- Consistent 98% on-time delivery rate maintained over past 36 months
- Flexible payment terms available for established customers
- Drop-shipping capability to end-user locations worldwide
- Standard models: 3-5 business days from order confirmation to shipment
- Express shipping option: 48-hour air freight delivery for emergency breakdown situations
- Real-time order tracking accessible through customer web portal
- Consistent 98% on-time delivery rate maintained over past 36 months
- Flexible payment terms available for established customers
- Drop-shipping capability to end-user locations worldwide
4. Comprehensive Warranty Coverage:
- Standard warranty: 12 months unlimited hours or 18 months from invoice date (whichever occurs first)
- Extended warranty program: Up to 24 months available at nominal additional cost
- Warranty covers manufacturing defects in materials and workmanship under normal operating conditions
- No-fault advance replacement policy: Replacement unit shipped immediately upon defect verification
- Full technical support throughout warranty period including remote diagnostics assistance
- Warranty claims processed within 5 business days of receipt and inspection
- Standard warranty: 12 months unlimited hours or 18 months from invoice date (whichever occurs first)
- Extended warranty program: Up to 24 months available at nominal additional cost
- Warranty covers manufacturing defects in materials and workmanship under normal operating conditions
- No-fault advance replacement policy: Replacement unit shipped immediately upon defect verification
- Full technical support throughout warranty period including remote diagnostics assistance
- Warranty claims processed within 5 business days of receipt and inspection
5. Value-Added Differentiators:
- Custom motor configuration service for OEM customers requiring specific displacement, speed, or mounting patterns
- Exchange program available: Credit toward remanufactured unit when returning core
- Preventive maintenance kit bundles including seals, bearings, and wear parts at discounted pricing
- Operator training materials and maintenance procedure documentation provided free of charge
- Fleet management support for customers managing multiple machines with consolidated ordering and inventory planning
- Custom motor configuration service for OEM customers requiring specific displacement, speed, or mounting patterns
- Exchange program available: Credit toward remanufactured unit when returning core
- Preventive maintenance kit bundles including seals, bearings, and wear parts at discounted pricing
- Operator training materials and maintenance procedure documentation provided free of charge
- Fleet management support for customers managing multiple machines with consolidated ordering and inventory planning
Contact MKS Hydraulic today to discover how our Gft9t22097 Travel Hydraulic Motor Assembly can restore your excavator's mobility to factory-new performance levels. Our dedicated team stands ready to provide expert technical guidance, competitive pricing, and unwavering commitment to your operational success. Trust MKS Hydraulic for quality you can measure and reliability you can count on.
