Essential details
MOQ:Min. Order: 1 unit
Shipping:Express delivery, air transport, land transport, sea transport
Product Introduction

Part Identification
Part Number: 105-3635Status:This is a current and activeCaterpillar part number. No supersession is indicated, meaning it is the latest version of this specific component.
Part Name and Function
Function: This breather is a critical but small component installed on the housing of a hydraulic piston pump (typically the main implement or steering pump). Its primary functions are to: Equalize Pressure:Allow the pump's internal casing to breathe, equalizing atmospheric pressure with the pressure inside the pump housing. This prevents pressure buildup or vacuum that could force oil past shaft seals or cause cavitation. Vent Gasses:Release any trapped air or vapors from the pump's casing. Filter Contaminants: It contains a filter element (often a bronze or synthetic mesh) that prevents dirt and dust from being drawn into the pump during this breathing process, protecting internal bearings and components.
Compatible Machine Models
Wheeled Dozers: 824G 824H
Wheel Loaders: 980G 980H
Soil Compactors: 825G 825H 826G 826G II 826H
Common Symptoms of a Failed or Clogged Breather
Hydraulic Oil Leak at Pump Shaft Seal: The most common symptom. If the breather is clogged, internal pressure in the pump housing builds up during operation and forces oil out past the main shaft seal. Pump Whine or Cavitation Noise:A blocked breather can create a vacuum, preventing oil from properly lubricating the pump's rotating group, leading to noise and potential damage. Visible Damage:The breather cap itself may be cracked, broken, or missing. Dirty Filter Element: Upon inspection, the internal filter is caked with dirt, dust, or debris.
What to Do Next
Locate and Inspect:Find the breather on the body of the hydraulic pump(s). It is typically a small, mushroom-shaped cap (about 1-2 inches in diameter) with a hex base. Check if it is damaged, missing, or clogged. Source the Part: Caterpillar Dealer: The best source for a genuine 105-3635 breather. They can confirm the location on your specific machine.Hydraulic Parts Suppliers:Many aftermarket suppliers stock these common breathers. Search for "105-3635 breather or Cat hydraulic pump breather."
Replacement is Simple but Critical: Clean the Area: Thoroughly clean the area around the breather port before removal to prevent dirt from falling into the pump. Unscrew and Replace: Simply unscrew the old breather and install the new one. Hand-tighten securely; do not over-torque. Check Oil Level: After replacement, check the hydraulic oil level in the system, as a leaking seal may have caused a loss.













