
Product Introduction – VOLVO L180H/L180G/L150G/L220H/L250G Variable Piston Pump 17201756 / VOE17201756
This variable‑displacement axial‑piston pump(part numbers 17201756 / VOE17201756) is a genuine Volvo hydraulic pump for L180H, L180G, L150G, L220H, and L250Gwheel loaders. It serves as the machine’s main hydraulic pump, supplying high-pressure flow to implement and steering circuits with load-sensing control for fast response, smooth operation, and high productivity. The L-series features advanced hydraulics and drivetrain integration for efficient cycles and lower fuel use, and the pump is a direct replacement for the OEM unit identified by the VOE/17201756 family.
Key Features and Benefits
Axial-piston, variable displacement design with load‑sensing control for efficient power matching and reduced heat generation.
High starting torque and excellent low-speed control for responsive lifting, tilting, and attachment operation.
Compact, power-dense build with low noise and low pulsation for operator comfort.
SAE/ISO standardmounting flanges and ports; through-drive capability on selected configurations for auxiliary pump mounting.
Designed for heavy-duty, high-cycle wheel loader service with long service life and easy maintenance.
Typical Applications and Machine Fitment
Primary hydraulic supply for L180H, L180G, L150G, L220H, L250G loaders in loading, stacking, and high-cycle material handling.
Supplies implement and steering circuits; steering is priority‑fed from the variable pump(s) in Volvo’s load-sensing hydraulic system.
Compatible with standard L‑series hydraulic architecture; ideal for both standard and high-performance attachment setups.
Ordering and Cross-Reference Guidance
Provide: machine model and serial number (S/N), required displacement, control type (e.g., pressure‑compensated, load‑sense, electro‑hydraulic), rotation direction, mounting flange/port standard (SAE/ISO), shaft type/keyway, seal material (NBR/FKM), and hydraulic fluid specification.
Confirm the exact build (control code, through-drive, shaft, ports) in Volvo PROSIS or the official parts catalog using the S/N before ordering.
This part is listed by multiple suppliers for the L150G/L180G/L180H/L220H/L250Gfamily under 17201756 / VOE17201756; verify fitment with your machine’s build list/SN prior to purchase.
Installation and Commissioning Essentials
Perform a full hydraulic system flush; pre-fill the pump to remove air. Ensure adequate suctionand that the case drain returns to tank with minimal backpressure.
Observe tightening torques and porting per data sheet; avoid restrictive fittings or check valves on the case drain line.
After start‑up, check for leaks, abnormal noise/vibration, and verify response to control inputs and system pressure.
Maintain clean hydraulic fluid and filters; follow recommended service intervals for seals and bearings.












