
Product Introduction – VOLVO 480E High-Pressure Travel Gear Pump 14644494 / VOE14644494
This high‑pressure gear pump (part numbers 14644494 / VOE14644494) is designed for VOLVO 480E wheel loaders and similar heavy equipment, primarily serving as the travel drive pump in certain hydraulic configurations or as a high‑pressure auxiliary pump for closed-circuit or high-demand implement circuits. Although gear pumps are normally fixed-displacement units, specific versions in this family are engineered for elevated pressure ratings to meet the rigorous duty cycles of construction and mining applications.
Key Features & Benefits
External gear design with reinforced housing and precision-ground gears for high volumetric efficiency and consistent flow.
High‑pressure capability (significantly above standard gear pump ratings) to support travel drive or high-load auxiliary functions.
Compact, lightweight construction with low noise and minimal flow pulsation.
Durable shaft seal and heavy-duty bearings for extended service life under varying temperatures and contamination levels.
SAE/ISO standard mounting flanges and ports for straightforward installation and broad system compatibility.
Reliable performance in open-center and closed-center hydraulic systems when paired with appropriate circuit protection.
Typical Applications
Travel drive pump in certain VOLVO 480E hydraulic configurations (verify circuit diagram).
High‑pressure auxiliary circuits such as attachment drives, steering boost, or implement functions requiring higher pressure than standard gear pumps provide.
Suitable for construction, mining, and material handling where a rugged, high‑pressure gear pump is preferred for simplicity and cost efficiency.
Ordering & Cross-Reference Guidance
To ensure correct fitment, please provide:
Machine model and serial number (e.g., VOLVO 480E, L120E, L150E variants if applicable).
Mounting flange and port size/standard (SAE/ISO), shaft type/keyway, and rotation direction (viewed from shaft end).
Seal material (NBR/FKM) and hydraulic fluid specification.
Confirm whether the pump is used for travel drive or auxiliary/high‑pressure circuit.
Preference for Genuine VOLVO (VOE) or high‑quality compatible/remanufactured unit.
Always verify in Volvo PROSIS or official parts catalog using the serial number before purchase.
Installation & Maintenance Essentials
Perform a full hydraulic system flush before installation; pre-fill pump to remove air.
Ensure suction conditions meet specifications and case drain returns directly to tank with minimal backpressure.
Observe tightening torques and porting per data sheet; avoid restrictive fittings or check valves on case drain line.
After start-up, check for leaks, abnormal noise/vibration, and verify correct flow and pressure at the intended circuit.
Maintain clean hydraulic fluid and filters; follow recommended service intervals for seals and bearings.
Aftermarket Supply & Availability
This pump is available as Genuine VOLVO (VOE), OEM-remanufactured, or compatible aftermarket. Multiple suppliers offer VOLVO 480E gear pumps and can source by part number or model; confirm fitment with your machine’s build list/SN prior to purchase.
Note: Because gear pumps are generally fixed-displacement, confirm from machine circuit diagram or nameplate whether this unit is truly the travel drive pump or serves another high-pressure auxiliary role. Misapplication can lead to insufficient flow or pressure for travel drive; always match pump function to system requirements.












