Essential details
MOQ:Min. Order: 1 unit
Shipping:Express, Air Freight, Land Transport, Sea Freight
Product Introduction

Part Number Breakdown
Fit: Very common in older D5, D6, and other equipment with these engines. This is a remanufactured (exchange) part; a core charge will apply. The exact engine model and serial number are absolutely required for confirmation. | ||
Fit:Could be for the implement (blade/ripper) control system on a D5/D6 dozeror part of the grapple/tilt circuit on a 527 Harvester. The machine serial number is the only way to confirm correct application. | ||
Fit: Based on the number, this is a very common shoe for D5H, D5H LGP, and similar D5/D6M configurations. The quantity, bolt pattern, and grouser height must be confirmed against the exact track configuration of your specific bulldozer. |
Machine-Specific Application Analysis
For the 527 D5HTSK II Timber Harvester: The 6E-5052 (Head Gasket) is plausible if the harvester is powered by a 3306 engine. The 0R-4993 (Valve/Manifold) is highly plausible for its complex hydraulic system controlling the boom, saw, grapple, and tilt functions. The 107-8136 (Track Shoe) is unlikely for the 527. Harvesters use a different, wider, lower-ground-pressure track configuration. This shoe is specific to bulldozers.
For the D5/D6M Series Tracked Bulldozers: The 6E-5052 (Head Gasket) is a classic engine repair part for 3306-powered D5H/D6M machines. The 0R-4993 (Valve/Manifold) is a likely component for the blade lift/tilt or ripper control valve bank. The107-8136 (Track Shoe) is a direct wear item. You would order these in quantities matching the number per track (e.g., 42 or 44 shoes per side).
Critical Advice Before Ordering or Installation
SERIAL NUMBER IS MANDATORY: This is the most critical step. The application of these parts, especially the valve (0R-4993), can vary dramatically between a timber harvester and a bulldozer, and even between different versions of the same dozer model. For the 527 Harvester: Provide the harvester's serial number. For the D5/D6 Dozer: Provide the bulldozer's serial number.
Core Charge & Reman Parts: The 6E-5052 (Head Gasket Set)is a remanufactured exchange unit. You will pay a core charge refundable upon return of your old, rebuildable cylinder head. Do not discard the old head. Undercarriage Matching: For the 107-8136 Track Shoe, you must ensure it matches all shoes on your track. Mixing different shoe types, bolt patterns, or wear levels on a single track can cause severe damage. Confirm the exact track groupfor your serial number. Professional Installation Recommended: All three parts require skilled installation. Head Gasket: Requires precise torquing sequences and often accompanying parts (head bolts, injector copper washers). Hydraulic Valve: Requires system cleanliness and proper calibration. Track Shoes: Require heavy-duty tools and proper track tensioning.
Confirm the exact description and fit for your serial number. Check for any part number updates or supersessions. Provide the correct quantity for wear items like track shoes. Offer necessary related parts (e.g., bolts for shoes, seal kits for valves).

Image uploading.....


Image uploading.....

Image uploading.....

Image uploading.....








