
Rexroth A4VSG71 control code quick guide
Model basics and key specs
All codes below are size 71 cm³/rev from the A4VSG family (swashplate, variable‑displacement axial‑piston pumps for closed‑circuit hydrostatic drives). Typical ratings for size 71: nominal pressure 350 bar, maximum pressure 400 bar, max. speed at Vg max ≈ 3200 rpm, theoretical flow at n nom and Vg max ≈ 227 L/min, and approx. weight ≈ 60 kg. The family covers sizes 40…1000 with high power density and long service life; many variants support through‑drive mounting of same‑size units.
Control code definitions for these variants
HD — Hydraulic control (pilot‑pressure‑related). Available in sub‑variants such as HD1/HD1D/HD1T/HD1U/HD2/HD3 with options like DU (U‑version interface), differing pilot‑pressure ranges, and features such as spring‑centering of the stroking cylinder. Typical for closed‑circuit systems needing pressure‑proportional flow control.
HM — Electrohydraulic control with servo/proportional valve; position‑related (swivel‑angle) control. Sub‑variants HM1 / HM2 denote different hardware/software generations or option sets. Suited for high‑dynamic, precise closed‑loop control of displacement/angle.
HS — Electrohydraulic control with servo/proportional valve; speed/valve‑based regulation. Common sub‑variants include HS / HS4 / HSK / HS4K / HS4M / HS4P reflecting interface, feedback, and valve‑stage options. Suited for high‑performance closed‑circuit drives.
EO — Electrohydraulic control, electronic (proportional) with current input; sub‑variants EO1 / EO2 indicate different control generations/interfaces. Provides accurate, electrically commanded swivel‑angle control with selectable failsafe/override behavior.
LR — Constant‑power (hyperbolic) control; sub‑variant LR2D is a specific implementation with defined dynamic response and interface options. Maintains near‑constant power over a wide speed/load band to improve efficiency and reduce heat.
How to read and complete the full type code
Typical full string: A4VSG 71 <Control>/<Series>‑<Rotation>‑<Interface/Suffix>
Example fragments you’ll see in the 71 family: /10R/L/W, /11R/L/W, and suffixes such as ‑PPB10N00, ‑PZB10K519N, ‑PPB10H029F, ‑PPB10G639Z (port/flange, shaft, sealing, through‑drive, and marketing suffixes).
Examples matching your list that are known to exist in distribution: A4VSG71EO1/10R‑PPB10G639Z, A4VSG71HD1D/10R‑PPB10H029N, A4VSG71HD1U/10R‑PPB10N000N, A4VSG71HD1A/10R‑PZB10K519N, A4VSG71HS/10R‑PPB10G640N. Use these as templates to verify the interface and options on your specific units.
Selection and ordering notes
Match the control family (HD/HM/HS/EO/LR) to your system’s control architecture: HD for hydraulic pilot‑pressure control, HM/HS/EO for electrohydraulic closed‑loop control (position/speed/electronic), LR for constant‑power demand.
Ensure the series (e.g., /10 /11 common on size 71), rotation (R/L/W), and interface suffix (flange/ports/shaft/sealing/through‑drive) exactly match your mechanical and hydraulic interfaces; small differences (e.g., PPB10 vs PZB10, or N00 vs K519N) change port standards, seals, or options.
The A4VSG is designed for closed‑circuit drives; if your application is open‑circuit, consider A4VSO or A4VG families instead.
Always confirm the complete type code against the nameplate and the latest data sheet before ordering; availability and lead time can vary by region and variant.












