
Rexroth A4VSG40 control code quick guide
Model basics
All codes below are size 40 cm³/rev from the A4VSG family (swashplate, variable‑displacement axial‑piston pumps for closed‑circuit hydrostatic drives). Typical ratings for the A4VSG family: nominal pressure 350 bar, maximum pressure 400 bar, and maximum speed at Vg max ≈ 3700 rpm (size‑dependent; size 40 is typically higher than large sizes). The family covers 40…1000 with high power density and long service life; many variants support through-drive mounting of same-size units.
Control code definitions for these variants
HD — Hydraulic control (pilot‑pressure‑related). Available in sub‑variants such as HD1/HD1D/HD1DU/HD2/HD3 with options like DU (e.g., U‑version interface), differing pilot‑pressure ranges, and features such as spring‑centering of the stroking cylinder. Typical for closed‑circuit systems needing pressure‑proportional flow control.
HM — Electrohydraulic control with servo/proportional valve; position-related (swivel-angle) control. Sub‑variants HM1 / HM2 denote different hardware/software generations or option sets. Suited for high-dynamic, precise closed-loop control of displacement/angle.
HS — Electrohydraulic control with servo/proportional valve; speed/valve-based regulation. Common sub‑variants include HS / HS4 / HSK / HS4K / HS4M / HS4P reflecting interface, feedback, and valve-stage options. Suited for high-performance closed-circuit drives.
EO — Electrohydraulic control, electronic (proportional) with current input; sub-variants EO1 / EO2 indicate different control generations/interfaces. Provides accurate, electrically commanded swivel‑angle control with selectable failsafe/override behavior.
LR — Constant‑power (hyperbolic) control; sub‑variant LR2D is a specific implementation with defined dynamic response and interface options. Maintains near-constant power over a wide speed/load band to improve efficiency and reduce heat.
How to read and complete the full type code
Typical full string: A4VSG 40 <Control>/<Series>-<Rotation>-<Interface/Suffix>
Example fragments you’ll see in the 40 family: /10R, /11R, /30R/L/W (series and rotation), and suffixes such as ‑PPB10N00, ‑PZB10K840N, -PKD60K249N (port/flange, shaft, sealing, through-drive, and marketing suffixes).
Examples matching your list that are known to exist in distribution: A4VSG40HD1DU/30R-PKD60K249N, A4VSG40HD3D/30R‑PZB10K840N, A4VSG40EO1/30R-PPB10N009N, A4VSG40HS4/30R-PPB10N009N, A4VSG40HM1/30L‑PPB10N009N, A4VSG40HM2/30R-PPB10N009N. Use these as templates to verify the interface and options on your specific units.
Selection and ordering notes
Match the control family (HD/HM/HS/EO/LR) to your system’s control architecture: HD for hydraulic pilot‑pressure control, HM/HS/EO for electrohydraulic closed‑loop control (position/speed/electronic), LR for constant-power demand.
Ensure the series (e.g., /10 /11 /30 common on size 40), rotation (R/L/W), and interface suffix (flange/ports/shaft/sealing/through‑drive) exactly match your mechanical and hydraulic interfaces; small differences (e.g., PPB10 vs PZB10, or N00 vs K840N) change port standards, seals, or options.
The A4VSG is designed for closed‑circuit drives; if your application is open‑circuit, consider A4VSO or A4VG families instead.
Always confirm the complete type code against the nameplate and the latest data sheet before ordering; availability and lead time can vary by region and variant.












