
Rexroth A4VSG355 control code quick guide
1. Model basics and key specs for size 355
All codes below are size 355 cm³/rev from the A4VSG family — a swashplate, variable-displacement axial-piston pump for closed‑circuit hydrostatic drives.
Typical ratings for A4VSG355:
Nominal pressure: 350 bar
Maximum pressure: 400 bar
Max. speed at Vg max: approx. 2000 rpm
Theoretical flow at n nom, Vg max: approx. 710 L/min
Approx. weight: ~235 kg
The A4VSG family covers sizes 40–1000, offering high power density, long service life, and optional through‑drive mounting of same‑size units.
2. Control code definitions for these variants
Code | Control type | Description & typical use |
|---|---|---|
MA | Manual control | Mechanical handwheel/lever adjustment of swashplate. Simple, no external pilot or electrical signals. Used for basic setups, testing, or where manual adjustment is acceptable. |
EO | Electrohydraulic control, electronic proportional | Current‑input proportional control of swashplate via solenoid valve. Sub‑variants EO1, EO2 indicate different generations or interface options (e.g., connector type, feedback signal). Allows precise electrical command of displacement with failsafe features. |
EO…K | EO control with “K” option package | The K suffix usually denotes a specific interface, connector, or accessory set (e.g., special electrical connector, additional ports, or pre‑wired harness). Must match exact definition in data sheet. |
EP | Electrical control, proportional | Similar to EO but often indicates a different valve stage or control characteristic (sometimes higher dynamics or different failsafe). Provides electrically commanded swivel-angle control. |
HD | Hydraulic control (pilot‑pressure related) | Proportional control via hydraulic pilot signal. Sub‑variants include HD1, HD1D, HD2, HD3 etc., differing in valve arrangement, pilot‑pressure range, and interface options. Used where hydraulic command signals are preferred. |
AA4VSG | Plug‑in variant for gearbox integration | "AA" prefix indicates a plug‑in version of A4VSG, designed for direct mounting into mechanical gearboxes with recessed flange. Functionally identical in control options but optimized for space‑saving integration. |
3. Meaning of suffixes and sub‑codes
MA – Manual adjustment, no external pilot or electrical signals.
EO1 / EO2 – Electronic proportional control, generation or interface difference.
K – Option package (connector, extra ports, wiring, etc.). Exact content defined in type code and data sheet.
EP – Electrical proportional control (different valve stage/characteristic from EO).
HD – Hydraulic pilot‑pressure control (sub‑variants HD1, HD2, HD3 etc. for different pilot ranges and features).
AA4VSG – Plug‑in version for gearbox mounting.
Full type code structure:
A4VSG 355 <Control><Variant>/<Series>‑<Rotation>‑<Interface/Suffix>
Examples:
A4VSG355MA/30R-PPB10N009N
A4VSG355EO1K/30R‑PZB10K840N
A4VSG355EO2/30R‑PPB10N009N
A4VSG355EO2K/30R‑PKD60K249N
A4VSG355EP/30R‑PPB10N009N
A4VSG355HD/30R-PPB10N009N
AA4VSG355MA/30R‑PPB10N009N
Series like /30 (common for size 355) and rotation R/L/W (clockwise, counterclockwise, reversible) must match your drive. The interface suffix defines flange, ports, shaft, sealing, and through‑drive options.
4. Selection and ordering notes
Choose MA for simple manual setup/testing; EO/EP for precise electrical control; HD for hydraulic pilot‑pressure control; AA4VSG for plug‑in gearbox integration.
The K suffix modifies the base control with a specific accessory/interface package — verify its exact meaning in the data sheet or with your supplier.
Ensure series, rotation, and interface suffix exactly match your mechanical/hydraulic interfaces; small differences (e.g., PPB10 vs PZB10, N00 vs K840N) change port standards, seals, or options.
A4VSG pumps are for closed‑circuit drives; for open‑circuit applications, consider A4VSO or A4VG families.
Always confirm the complete type code against the nameplate and latest data sheet before ordering — availability and lead time vary by region and variant.












