
Rexroth A4VSG355 control code quick guide
Model basics and pressure ratings
All codes below are size 355 cm³/rev from the A4VSG family (swashplate, variable‑displacement axial‑piston pumps for closed‑circuit hydrostatic drives). Typical ratings for size 355: nominal pressure 350 bar, maximum pressure 400 bar, max. speed at Vg max ≈ 2000 rpm, theoretical flow at n nom, Vg max ≈ 710 L/min, and approx. weight ≈ 235 kg. The A4VSG family covers sizes 40…1000 with high power density and long service life; many variants support through-drive mounting of same-size units.
Control code definitions for these variants
HD — Pilot‑pressure‑related proportional control (hydraulic control). Available in sub‑variants such as HD1 / HD1D / HD1DU / HD3D with options like DU (e.g., U-version interface), differing pilot-pressure ranges, and features such as spring-centering of the stroking cylinder. Suitable for closed-circuit systems requiring pressure-proportional flow control.
HM — Electrohydraulic control with servo/proportional valve; position‑related (swivel‑angle) control. Sub‑variants HM1 / HM2 denote different hardware/software generations or option sets. Used for high-dynamic, precise closed-loop control of displacement/angle.
HS — Electrohydraulic control with servo/proportional valve; speed/control-valve-based regulation. Common sub-variants include HS / HS4 / HSK / HS4K / HS4M / HS4P reflecting interface, feedback, and valve-stage options. Suited for high-performance closed-circuit drives.
EO — Electrohydraulic control, electronic (proportional) with current input; sub‑variants EO1 / EO2 indicate different control generations/interfaces. Provides accurate, electrically commanded swivel-angle control with selectable failsafe/override behavior.
LR — Hyperbolic (constant-power) control; sub-variant LR2D is a specific implementation with defined dynamic response and interface options. Maintains near‑constant power over a wide speed/load band to improve efficiency and reduce heat.
How to read and complete the full type code
Typical full string: A4VSG 355 <Control>/<Series>-<Rotation>-<Interface/Suffix>
Example fragments you’ll see in the 355 family: /30R, /30L, /30W (series and rotation), and suffixes such as -PPB10N009N, ‑PZB10K840N, -PKD60K249N, ‑PPB10K020NESO523 (port/flange, shaft, sealing, through-drive, and marketing suffixes).
Examples matching your list that are known to exist in distribution: A4VSG355HD1DU/30R‑PKD60K249N, A4VSG355HD3D/30R-PZB10K840N, A4VSG355EO1/30R‑PPB10N009N, A4VSG355HS4/30R-PPB10N009N, A4VSG355HM1/30L‑PPB10N009N, A4VSG355HM2/30R-PPB10N009N. Use these as templates to verify the interface and options on your specific units.
Selection and ordering notes
Match the control family (HD/HM/HS/EO/LR) to your system’s control architecture: HD for hydraulic pilot-pressure control, HM/HS/EO for electrohydraulic closed‑loop control (position/speed/electronic), LR for constant‑power demand.
Ensure the series (e.g., /30 common on 355 size), rotation (R/L/W), and interface suffix (flange/ports/shaft/sealing/through-drive) exactly match your mechanical and hydraulic interfaces; small differences (e.g., PPB10 vs PZB10, or N00 vs K840N) change port standards, seals, or options.
The A4VSG is designed for closed-circuit drives; if your application is open-circuit, consider A4VSO or A4VG families instead.
Always confirm the complete type code against the nameplate and the latest data sheet before ordering; availability and lead time can vary by region and variant.












