
Rexroth A4VSG125 control code quick guide
Model basics and key specs for size 125
All codes below are size 125 cm³/rev from the A4VSG family (swashplate, variable‑displacement axial‑piston pumps for closed‑circuit hydrostatic drives). Typical ratings for size 125: nominal pressure 350 bar, maximum pressure 400 bar, maximum speed at Vg max ≈ 2600 rpm, theoretical flow at n nom and Vg max ≈ 325 L/min, and approx. weight ≈ 107 kg. The family covers sizes 40…1000 with high power density and long service life; many variants support through-drivemounting of same-size units.
Control code definitions for these variants
HD — Pilot‑pressure‑related proportional control (hydraulic control). Available in sub‑variants such as HD1/HD1D/HD1DU/HD2/HD3 with options like DU(U-version interface), differing pilot-pressure ranges, and features such as spring-centering of the stroking cylinder. Typical for closed-circuit systems needing pressure-proportional flow control.
HM — Electrohydraulic control with servo/proportional valve; position-related (swivel-angle) control. Sub‑variants HM1 / HM2 denote different hardware/software generations or option sets. Suited for high‑dynamic, precise closed‑loop control of displacement/angle.
HS — Electrohydraulic control with servo/proportional valve; speed/valve‑based regulation. Common sub‑variants include HS / HS4 / HSK / HS4K / HS4M / HS4Preflecting interface, feedback, and valve-stage options. Suited for high-performance closed-circuit drives.
EO — Electrohydraulic control, electronic (proportional) with current input; sub‑variants EO1 / EO2 indicate different control generations/interfaces. Provides accurate, electrically commanded swivel‑angle control with selectable failsafe/override behavior.
LR — Constant‑power (hyperbolic) control; sub‑variant LR2D is a specific implementation with defined dynamic response and interface options. Maintains near‑constant power over a wide speed/load band to improve efficiency and reduce heat.
How to read and complete the full type code
Typical full string: A4VSG 125 <Control>/<Series>-<Rotation>-<Interface/Suffix>
Example fragments you’ll see in the 125 family: /30W, /30R/L/W (series and rotation), and suffixes such as ‑PKD60N000N, ‑VZB10N000N (port/flange, shaft, sealing, through‑drive, and marketing suffixes).
Examples matching your list that are known to exist in distribution: P A4VSG 125 HS /30W‑PKD60N000N (R902550020), PA4VSG125HS4/30W‑VZB10N000N‑SO572. Use these as templates to verify the interface and options on your specific units.
Selection and ordering notes
Match the control family (HD/HM/HS/EO/LR) to your system’s control architecture: HDfor hydraulic pilot-pressure control, HM/HS/EO for electrohydraulic closed‑loop control (position/speed/electronic), LR for constant‑power demand.
Ensure the series(e.g., /30 common on size 125), rotation (R/L/W), and interface suffix (flange/ports/shaft/sealing/through‑drive) exactly match your mechanical and hydraulic interfaces; small differences (e.g., PKD60vs VZB10, or N000N vs other option codes) change port standards, seals, or options.
The A4VSG is designed for closed‑circuit drives; if your application is open‑circuit, consider A4VSO or A4VG families instead.
Always confirm the complete type code against the nameplate and the latest data sheetbefore ordering; availability and lead time can vary by region and variant.












