
Rexroth A4FO180 Fixed‑Displacement Axial Piston Pump for High‑Load Construction and Marine Equipment
1. Product Overview
The A4FO180 is a fixed-displacement, swashplate-type axial piston pumpfrom Rexroth’s A4FO series, designed for high-load open-circuit applications in construction machinery and marine equipment. It delivers constant flow proportional to drive speed and displacement, with high total efficiency, low noise, long service life, and excellent suction characteristics. Its rugged construction and ability to handle high continuous pressures make it well suited for demanding mobile and stationary environments.
2. Key Specifications (Size 180)
Parameter | Value |
|---|---|
Displacement (Vg) | 180 cm³/rev |
Nominal pressure (p nom) | 350 bar |
Maximum pressure (p max) | 400 bar |
Max. continuous speed (standard version) | 1800 rpm |
Max. continuous speed (high-speed version) | 1900 rpm |
Theoretical flow at n nominal (standard) | 324 L/min |
Theoretical flow at n nominal (high-speed) | 342 L/min |
Power at n nominal and p nominal (standard) | 189 kW |
Power at n nominal and p nominal (high-speed) | 199 kW |
Torque at p nom | 1000 N·m |
Approx. weight | ~85 kg |
Direction of rotation | R/L (viewed on shaft end) |
Shaft end | Parallel key DIN 6885 (standard) |
Flange and ports | SAE standard |
Seals | NBR body / FKM shaft seal (standard) |
Additional ports | T1/T2 suction, case drain, gauge ports, U flushing port (bearing flushing) |
Ratings assume mineral oil, pabs ≥ 1 bar at suction, and fluid viscosity within optimum range. Performance with HFD/HFA/HFB/HFC fluids may require derating — verify with fluid compatibility data.
3. Design Features & Benefits
Fixed displacement ensures stable, predictable flow directly linked to drive speed.
High total efficiency reduces fuel/energy consumption and operating cost in continuous-duty applications.
Low noise operation improves comfort and meets environmental regulations on construction sites and vessels.
Long service life due to hardened components and proven swashplate design, resistant to wear under high loads.
Excellent suction characteristics allow reliable operation with longer suction lines or varying fluid levels common in mobile/marine tanks.
Through-drive capabilityfor mounting additional same-size pumps, enabling compact multi-pump arrangements for increased flow/power.
SAE flanges and ports simplify integration into standard industrial and mobile hydraulic systems.
Available in standard and high‑speed versions to match different flow and power requirements.
4. Typical Applications
High-load construction equipment: Wheel loaders, excavators, concrete pumps, crane systems, and piling rigs requiring steady high flow at high pressure.
Marine equipment: Deck machinery, winches, thrusters, steering gears, and auxiliary systems on workboats, ferries, and offshore support vessels.
Stationary industrial systems: Large hydraulic power units, test rigs, material handling equipment subject to high continuous loads.
5. Model Code Structure
Example: A A4F O 180 /30 R-PPB25N00
A4FO180— Fixed-displacement axial piston pump, size 180 cm³/rev
/30— Series (common for size 180)
R— Rotation (clockwise viewed on shaft end; L = counterclockwise)
PPB25N00 — Interface/option package:
P = Seals (NBR body / FKM shaft seal)
P = Shaft (parallel key DIN 6885)
B = Mounting flange (SAE)
25 = Port code
N00 = No through-drive / standard shaft end
Known order numbers (examples): R902466132, R902420733 — always match suffix to your flange/port/shaft/sealing needs.
6. Installation & Operation Notes
Suction pressure: Maintain absolute suction pressure pabs ≥ 0.8 bar (higher inlet pressure improves speed capability).
Fluid: Designed primarily for mineral oil; HFD versions available. HFA/HFB/HFCmay require derating — check data sheets RE 90220/90221/90223.
Ports: Includes service ports (B/A), suction (T1/T2), case drain, gauge ports, and a dedicated U flushing port for bearing flushing (factory plugged).
Rotation & mounting: Select R/L to match your drive; use SAE flanges and specified parallel key shaft per DIN 6885 for proper coupling and alignment.
Through-drive: Available for adding same-size pumps; ensure series and interface suffix match your combined‑pump layout.
Marine/construction considerations: Protect against moisture, salt, and vibration; use marine-grade wiring and connectors if equipped with auxiliary devices.
7. Selection & Ordering Notes
Match series, rotation, and interface suffix precisely to your mechanical and hydraulic interfaces — small differences (e.g., PPB25 vs PZB25, or N00 vs Kxxx) change port standards, seals, or options.
Verify complete type code against nameplateand latest datasheet before ordering — availability and lead time can vary by region and variant.
For construction and marine use, maintain oil cleanliness (ISO 4406 ≥ 18/15) and proper cooling to maximize service life and efficiency under high continuous loads and harsh environmental conditions.













