Essential details
MOQ:Min. Order: 1 unit
Shipping:Express delivery, air transport, land transport, sea transport
Product Introduction

Model Number Decoding (A11VLO190LRDCH2-10R-NXDXXKXX-S)
A11VLO: The series identifier for Rexroth's open circuit axial piston pumps (bent-axis design for high power density). 190:The nominal displacement is 190 cc/rev (cubic centimeters per revolution). This is a large displacement pump, suitable for high flow requirements. L: Load Sensing Control (L). This is a critical feature. The pump automatically adjusts its displacement (and thus output flow) to maintain a constant pressure differential (Δp) above the highest load pressure in the system. This saves energy and reduces heat generation. RD: Pressure Cut-Off Control (D) combined with the load sensing (R). The "RD" means it has a dual control: R:The main load-sensing control for efficient flow matching. D (Druck = Pressure): A pressure cut-off or pressure limiter. When system pressure reaches a pre-set maximum (e.g., 350 bar), the pump de-strokes to nearly zero displacement, holding that pressure without wasting energy.
C: Shaft end style. "C" typically indicates a splined shaft (often SAE or metric standard) for connecting to the engine or transmission. H2: Design variant related to internal porting, control mounting, and specifics of the pressure cut-off setting. This is a detail often found in engineering drawings. 10R: Rotation direction. "10R" designates counter-clockwise rotationwhen viewed from the shaft end. ("10L" would be clockwise). NXDXXKXX:This section denotes porting and mounting options. N: Standard through-drive (allows a second pump to be mounted in tandem on the same shaft). XDXXKXX: Specifies the exact location, size, and orientation of the pressure (P), tank (T), and case drain (L) ports, as well as the control mounting side. This is crucial for installation in a specific machine frame.
S: Sealing variant. "S" usually indicates standard seals suitable for mineral-based hydraulic oils (HLP). Different letters (like V) might be used for special fluids like HFDU (ester-based).
Key Features & Characteristics
Variable Displacement:Adjusts output flow (0 to ~190 cc/rev) based on system demand, controlled by the load-sensing mechanism. High Pressure:Typically operates at continuous pressures up to 350 bar (≈5,075 psi), with peaks even higher. This is essential for excavator cylinders and mining tool actuation. Load Sensing (LS) + Pressure Cut-Off:The core of its efficiency. It only produces the flow and pressure needed, minimizing fuel consumption and cooling requirements. Through-Drive (Tandem Capability):The "N" in the code means it can drive a second auxiliary pump (e.g., a gear pump for pilot control or fan circuits) from its rear shaft. This is a very common setup. Bent-Axis Design:Known for high efficiency, robustness, and long service life under harsh conditions—perfect for excavation and mining.
Primary Applications
Hydraulic Excavators: As the main pump for the travel, swing, and attachment (boom, arm, bucket) circuits. Mining Machinery: Used in: Underground mining equipment (LHDs - Load Haul Dump, drill rigs). Surface mining equipment. Rock breakers and material handlers.
Other Heavy-Duty Mobile Equipment:Where high power, efficiency, and reliability are critical.
Important Considerations for Use & Maintenance
Fluid Cleanliness: Absolutely critical.This is a high-precision component. A minimum cleanliness level of ISO 4406 18/16/13 or better is required. Use high-quality filters. Break-In:Proper break-in procedure with low-pressure, gradual loading is recommended for new or rebuilt pumps. Case Drain Line: The case drain (leakage) port "L" must be directly connected to the tank with a low-restriction line.Pressure in this line must be kept very low (typically below 2-3 bar). Control Pressure:The load-sensing control requires a stable signal pressure from the system. Issues here will cause erratic pump behavior. Consult Official Documentation:For installation, commissioning, and troubleshooting, always refer to the official Rexroth technical data sheet (RE 92702) and the specific parts manual for this exact model code. Spare parts kits (like repair kits) are model-specific.
Summary













