Essential details
MOQ:Min. Order: 1 unit
Shipping:Express delivery, air transport, land transport, sea transport
Product Introduction

Part Number Breakdown
Application & Usage Context
146-3685 (Seal Kit):This part is used during cylinder rebuilds to stop hydraulic oil leaks from the lift cylinders. Leaking cylinders are a common repair item due to the high pressures and constant movement. A rebuild involves disassembling the cylinder, replacing all seals in this kit, polishing the rod (if in good condition), and reassembling. 160-9880 (Filter):This is a critical maintenance filter. On these loaders, the hydraulic and transmission systems often share a common tank and filtration. Changing this filter at the prescribed intervals (as per the machine's Operation & Maintenance Manual) is essential for preventing wear and failure in both the transmission and hydraulic systems.
Crucial Advice Before Ordering or Replacing
VERIFY WITH YOUR SERIAL NUMBER (S/N): This cannot be overstated. While these part numbers are strongly associated with the G-Series models listed, Caterpillar frequently issues engineering updates and changes. For the Seal Kit (146-3685): The cylinder serial number (stamped on the cylinder barrel) is the definitive identifier. Using it ensures you get the exact kit for your cylinder's manufacturing revision. For the Filter (160-9880): The machine serial numberis the safest check to confirm this is the correct filter and that there isn't a newer superseded part number.
Genuine vs. Aftermarket:For the seal kit (146-3685), using a Caterpillar seal kit is highly recommended. The precise compound and dimensions of the seals are critical for longevity and performance in high-pressure applications. For the filter (160-9880), quality is paramount; genuine Cat filters or high-quality equivalents from trusted brands (like Donaldson, Baldwin) that meet the specification are common choices. Proper Procedure is Key: Cylinder Rebuild: Requires proper tools, a clean environment, and knowledge to avoid damaging the rod or barrel. Incorrect installation can lead to immediate failure. Filter Change: Always use a new filter gasket/O-ring, pre-fill the filter with clean hydraulic fluid if possible, and follow proper start-up procedures to prime the system.
They can confirm the latest part number, compatibility, and any related parts you may need (e.g., hydraulic fluid, wear rings, bucket seals). They can also provide access to the official Service Information System (SIS) for the correct repair procedure.













