Essential details
MOQ:Min. Order: 1 unit
Shipping:Air transport, land transport, sea transport, express delivery
Product Introduction






| Precautions for use | ![]() | |
| 1. Do not knock when installing the coupling | ||
| 2. The pump casing shall be filled with oil | ||
| 3. Exhaust the air in the suction pipe | ||
| 4. Check the filter | ||
| 5. Check the cleanness of oil | ||
| 6. Check the oil level | ||
| 7. Check whether the pump direction is correct | ||
| 8. Connect the oil drain pipe with the highest T-port | ||
| Common troubleshooting | ||
| 1. No pressure, abnormal sound in pump case | There is air in the suction pipe; Remove air from suction piping. Damage of internal accessories; Immediately stop using and contact us. | |
| 2. No pressure, no abnormal sound in the pump case | The coupling is loose; Reinstall and secure coupling. Mismatching of steering; Newly order a pump that matches the steering. The oil suction pipe switch is not turned on; Open the oil suction pipe switch. The pressure of control valve is not enough; Clockwise adjust control valve. The control valve element is blocked by impurities; Remove the valve core and clean it. | |
| 3. There is pressure, but the pressure is not enough, without abnormal sound | Insufficient pressure of control valve DR valve; Clockwise adjust DR valve. Control valve DR valve is blocked by impurities; Disassemble the valve core of DR valve and clean it. | |
| 4. There is pressure, but there is an abnormal sound in the pump | The coupling is loose; Reinstall and secure coupling. Air or moisture in the oil; Remove air or filtered water from the oil suction pipe. Impurities in the pump; Immediately stop using and contact us. | |
| 5. Insufficient flow | Low oil tank level; Fill the oil to the normal level. Blockage of the oil suction pipeline filter; Replace the filter. The maximum displacement limiter is limited; Anticlockwise adjust the displacement limiter. | |
| 6. Excessive noise | The coupling is loose; Reinstall and secure the coupling. Air or moisture in the oil; Remove air or filtered water from the oil suction pipe. Excessively high pressure of the control valve DR valve; Adjust the DR valve counterclockwise. | |
| 7. Oil leakage at the framework oil seal | The oil drain pipe is too long or blocked; Shorten the drain piping, reduce turns, and detect blockages. Excessive wear and oil leakage of internal accessories; Immediately stop using and contact us. Too high opening pressure of check valve of oil drain pipe; Replace with lower pressure or remove check valve. | |
| 8. Rapid oil temperature rise | Poor radiator effect; Replace the radiator. The overflow valve of the system is damaged or the pressure is too low, resulting in long-term large displacement output of the pump; Replace or adjust the overflow valve pressure of the system. |







