Essential details
MOQ:Min. Order: 1 unit
Shipping:Express delivery, air transport, land transport, sea transport
Product Introduction

Part Identification & Supersession Chain
Latest/Current Part Number: 125-4527
6E-5650→ 6E-6412→ 6E-6627→ 0R-7658→ 9T-8929→ 120-0576→ 125-4527125-4527for sourcing.The previous numbers are for identifying an old part on your machine.Part Name and Function
Function:This is a critical engine fuel system component. It is a mechanically driven pump (usually gear-driven from the engine) that: Draws fuel from the main tank. Delivers it at low pressure (typically 30-70 psi) to the secondary fuel filters. Supplies a constant, steady flow of fuel to the inlet of the engine's primary fuel injection pumps (the unit injectors on these Cat 3500-series engines).
Importance:It ensures the high-pressure injection system never starves for fuel, preventing power loss, cavitation, and potential damage to the much more expensive injectors.
Compatible Machine Models
789B 789C 793 793B 793C
Common Symptoms of a Failing Fuel Transfer Pump
Loss of Power / Low Power: The engine cannot get enough fuel under load. Difficulty Starting or Extended Cranking: Poor fuel supply to the injection system. Engine Stalling or Shuddering, especially under load or at high RPM. No Start Condition (complete pump failure). Low Fuel Pressure reading at the secondary filter head (visible on gauges or diagnostic codes). External Fuel Leaks from the pump body, seal, or diaphragm. Air in the Fuel System(caused by a leaking internal seal or cracked housing), leading to erratic operation.
What to Do Next: Diagnosis & Replacement
Confirm Diagnosis:Before replacement, a mechanic should: Check for diagnostic fault codes related to fuel pressure. Perform a fuel pressure test at the pump outlet to confirm it's below specification. Inspect for air in the fuel system (clear lines, check for bubbles). Rule out simple issues like clogged primary/suction screens or fuel filters.
Source the Part: Caterpillar Dealer: The best source for a genuine 125-4527 pump assembly, which includes gaskets and seals. They guarantee fit and performance.Quality Aftermarket/Remanufacturers:Reputable fuel system specialists (like Racor, CAT Reman, or certified rebuilders) offer reliable rebuilt or new aftermarket pumps. Search for "125-4527 Fuel Transfer Pump" or "Cat 3512/3516 Transfer Pump." Rebuild Kits: For some earlier part numbers in the chain, repair kits ( 0R-5546was common) were available, but for the current125-4527, replacement as an assembly is standard.
Installation & Best Practices: Professional Installation Recommended: Replacement involves working on the engine gear train (timing), fuel lines, and requires proper torque procedures. Prime the System:The fuel system must be thoroughly bled of air after installation to prevent damage. Replace Related Items: Always install new fuel filters and inspect the lines from the tank to the pump for restrictions or leaks. Consider replacing the flexible hose sections if old.
125-4527, which is the Fuel Transfer Pump (Lift Pump). It is a vital wear item on the Cat 3500-series engines in 789 and 793 series trucks. Symptoms of failure directly impact engine power and operation. Diagnosis with a pressure test is recommended before replacement. Always use the machine's serial number for final verification.











