
Product Introduction – CAT A10VSO45 Series 31 Open Circuit Piston Pump
This high-performance, variable-displacement axial piston pump is designed for open-circuit hydrostatic drives in mobile and industrial hydraulic systems. It delivers smooth, stepless flow proportional to drive speed and displacement, with a proven track record in excavators, wheel loaders, and general industrial machinery. The A10VSO45 (Series 31) combines high pressure capability with low noise, fast response, and long service life in a compact, power-dense package.
Key Specifications
Item | Specification |
|---|---|
Displacement (Vg max) | 45 cm³/rev |
Nominal pressure (pnom) | 280 bar |
Maximum pressure (pmax) | 350 bar |
Max. speed at Vg max (standard) | 2600 rpm |
Max. speed at Vg max (high-speed version) | 3000 rpm |
Flow at Vg max and nnom | 117 L/min |
Flow at Vg max and 1500 rpm | 68 L/min |
Power at qV nom and pnom | 55 kW |
Torque at Vg max and pnom | 200 N·m |
Weight (approx.) | 23.5 kg |
Control options | DG, DR, DRG, DFR/DFR1, DFLR, ED, ER |
Shaft/flange/oil port | ISO 3019-2 2-hole (A), SAE J744flanges, SAE J518 ports |
Through-drive | Up to same size (100% capability) |
Case drain | 2 drain ports |
Values are for mineral oil, at optimum viscosity and 1 bar absolute suction; high‑speed version and other options may alter ratings.
Features and Benefits
Open-circuit design with swashplate axial piston architecture; flow is proportional to speed and displacement.
Excellent suction characteristicsand low noise for improved operator comfort and system efficiency.
Short control response time and high power-to-weight ratiofor dynamic performance.
Two case drain ports; drive shaft handles both axial and radial loads.
Wide control range (pressure, flow, power, remote pressure) to match diverse applications.
Through-drivefor tandem/auxiliary pumps (up to same displacement).
Typical Applications
Excavators and wheel loaders(boom/arm/attachment circuits, pilot and implement drives).
Mobile hydraulic systems and industrial machineryrequiring variable flow and pressure control.
Model Code and Installation Notes
Example code: A10VSO45DFR1/31R‑PPA12N00
Breakdown: A10VSO = variable axial piston pump, 45 = displacement, DFR1 = pressure/flow control, 31= series, R = clockwise rotation, P = seal (NBR/FKM), P= keyed shaft (DIN 6885), A = ISO 2‑hole flange, 12 = SAE metric ports, N00 = no through‑drive.
Ensure suction conditions meet requirements: minimum absolute inlet pressure 0.8 bar, maximum 30 bar; maintain recommended viscosity window 16–36 mm²/s for optimal life and efficiency.
Case drain must return directly to tank with backpressure ≤ 0.05 MPa; avoid check valves on the case drain line.
Observe tightening torques per VDI 2230 and manifold/port specifications; do not exceed maximum allowable values.
Safety and Compliance
This pump is intended for open‑circuit use; pressure control/limiting devices are not integral—provide a system relief valvefor overpressure protection.
Planning, assembly, and commissioning must be performed by qualified personnel; follow the manufacturer’s safety and installation instructions.
This product is not certified to DIN EN ISO 13849 as a general machine safety component.












