
Caterpillar 432E 434E 442E 444E GP Working Pump 267‑2755
Overview and Applications
Genuine CAT pump assembly 267‑2755 (PUMP GP‑PISTON) is the implement/steering hydraulic pump for 432E/434E/442E/444E Backhoe Loaders. It is a variable‑displacement, pressure‑compensated piston pump in a closed‑center, load‑sensing system. Typical machine serial prefixes include BXE, FSH, GKZ, LBE (various configurations and engine options). The pump is commonly referenced with reman p/n 10R‑8708 for CAT’s exchange program. Cross‑fitment listings also show compatibility with 289‑6370 in aftermarket catalogs; verify by serial prefix and configuration before ordering.
Key Specifications
Function: Variable displacement axial‑piston pump for open‑center, load‑sensing implement/steering circuits.
System type: Closed center load sensing (CLSS).
Typical performance on 434E: pump flow approx. 41.0 gpm (156 L/min), system pressure up to 249 bar (≈3611 psi) (machine specification; actual pump delivery varies with engine speed and control settings).
Identification: Pump body ports commonly include T1 (discharge), T2 (load sense), T3 (pilot pressure), and an SOS oil sampling port for condition monitoring.
Part Numbers and Ordering
New CAT: 267‑2755 (also written 2672755).
Reman CAT: 10R‑8708 (exchange unit).
Aftermarket listings: 289‑6370 appears as an alternative/new aftermarket p/n in some catalogs; confirm fitment by serial prefix, configuration, and pump tag before purchase.
When ordering, provide: machine model and serial prefix, engine (3054C or C4.4), loader valve type (mechanical or pilot), and required options (e.g., seals, shaft/flange).
Typical Fitment Examples
432E Parallel Lift, Side Shift — BXE00001‑UP (engine 3054C).
434E Parallel Lift, Side Shift — FSH00001‑UP (engine 3054C).
442E Parallel Lift, Side Shift — GKZ00001‑UP (engine 3054C).
444E Parallel Lift, Side Shift — LBE00001‑UP (engine 3054C).
These prefixes and others are documented for the 420E/430E/432E/434E/442E/444E family and are used to ensure correct pump configuration.
Installation and Maintenance Notes
The pump control valve incorporates the torque control and flow compensator adjustments; the T2 load‑sense tap is typically accessible from the cab for diagnostics and tuning.
The hydraulic oil filter is located on the left frame rail; ensure the filter bypass is functional and oil cleanliness meets machine S·O·S targets.
The 420E/430E utilize a hydraulically assisted (boosted) brake circuit fed from the pilot system; check pilot accumulator charge and brake valve operation during pump service.
Post‑installation: bleed air, verify LS pressure differential, check for noise/heat, and recheck case drain flow and filter condition after the first few hours of operation.












