
Product Introduction – CAT 730/725 Articulated Truck Hydraulic Piston Pump
This high-pressure hydraulic piston pump is designed for Caterpillar 730 and 725 articulated dump trucks, delivering reliable power for body raise/lower, ejector, and other implement functions in demanding mining and construction cycles. It is built to OEM standards for durability, consistent performance, and easy integration with CAT hydraulic systems.
Key Features
Application fitment: Engineered for CAT 730 / 725 ADTs; suitable for high-cycle, high-load operations.
Pump type: Axial piston pump with variable displacement for efficient flow and pressure control across varied loads.
Durability: Heavy-duty construction and precision tolerances for extended service life and reduced downtime.
System compatibility: Matches CAT hydraulic circuits and controls; integrates with machine-mounted control valves and manifolds.
Maintenance: Designed for straightforward serviceability with accessible ports, replaceable wear components, and clear identification.
Parts Identification
OEM part numbers: 224‑4430 / 2244430, 10R‑6686 / 10R6686 (use for cross-referencing within the same pump family; verify against your machine’s build list/SN).
Technical Notes
Specific flow and pressure ratings are defined by the machine’s hydraulic circuit and control settings; always align pump selection with the implement’s duty cycle and required cycle times.
For cold-climate or high-altitude operations, confirm fluid viscosity and charge pressure meet OEM specifications to prevent cavitation and wear.
Installation & Maintenance Recommendations
Perform a full hydraulic flush before start-up; pre-fill the pump and lines to remove air.
Verify inlet conditions (suction strainer/filter cleanliness, oil level, and temperature) to ensure proper NPSH and avoid cavitation.
Bleed air from the system and check for external leaks; confirm correct rotation direction and pressure settings prior to load application.
Use OEM-specified hydraulic fluid and filters; follow the recommended drain/fill intervals and contamination control practices.
After installation, cycle the implement through full travel several times and recheck torque on mounting bolts and manifold connections.












