필수 정보
최소 주문 수량:1 Piece
배송 방법:快递, 空运, 陆运, 海运
제품 소개
## Product Overview\nThe A2FM355 Hydraulic Axial Piston Fixed Motor represents the pinnacle of heavy-duty hydraulic motor technology from Rexroth's renowned A2FM series. As a large-displacement fixed motor designed for extreme power applications, this unit delivers exceptional torque output and reliability for the most demanding industrial machinery and construction equipment.\n\n## Product Features & Performance Characteristics\n\n**High-Torque Design:**\n- Massive 355 cc/rev displacement for maximum torque output\n- Operating pressure up to 400 bar (5800 psi) continuous operation\n- Exceptional starting torque capability for heavy-load applications\n- Fixed displacement ensures consistent performance under all load conditions\n- Optimized for low-speed, high-torque applications requiring smooth operation\n\n**Heavy-Duty Construction:**\n- Robust housing design with reinforced bearing system\n- Precision-machined components for extended service life under severe conditions\n- High-capacity radial and axial bearings for extreme load handling\n- Corrosion-resistant materials suitable for harsh operating environments\n- Advanced sealing technology for leak-free operation\n\n**Technical Specifications:**\n- Displacement: 355 cc/rev\n- Maximum Pressure: 400 bar (continuous), 450 bar (intermittent)\n- Speed Range: Up to 2650 rpm (depending on application requirements)\n- Torque Output: Extremely high torque suitable for heavy machinery\n- Port Size: Large SAE flange mounts for high-flow applications\n- Weight: Heavy-duty construction for stability and durability\n\n## Quality Control & Testing Procedures\n\n**Manufacturing Standards:**\n- ISO 9001:2015 certified manufacturing processes\n- Each unit undergoes comprehensive quality inspection before shipment\n- 100% pressure testing at maximum rated pressure to ensure integrity\n- Dimensional verification using precision CMM measuring equipment\n- Material certification and traceability documentation\n\n**Testing Protocol:**\n1. **Material Inspection:** Raw material certification and metallurgical analysis\n2. **Precision Machining:** CNC machining with tight tolerances (±0.01mm)\n3. **Assembly Quality:** Clean room assembly with strict contamination control\n4. **Performance Testing:** Full-load bench testing at rated pressure and speed\n5. **Endurance Testing:** Extended run-in test under simulated extreme load conditions\n6. **Thermal Testing:** Verification of heat dissipation and cooling performance\n7. **Final Inspection:** Comprehensive visual, dimensional, and functional verification\n8. **Documentation:** Complete test reports, certificates, and traceability records\n\n## Applications & Industries\n\n**Primary Application Areas:**\n- **Heavy Construction Machinery:** Large excavators (30+ tons), bulldozers, wheel loaders, crawler cranes\n- **Mining Equipment:** Haul trucks, crushers, drilling rigs, conveyor systems\n- **Marine & Offshore:** Winch systems, deck machinery, propulsion systems, offshore platforms\n- **Industrial Processing:** Steel mills, metal forming presses, heavy material handling\n- **Agricultural Machinery:** Large tractors, harvesters, agricultural processing equipment\n- **Renewable Energy:** Wind turbine pitch systems, solar tracking systems, hydroelectric equipment\n\n**Industry Solutions:**\nThe A2FM355 is specifically engineered for applications requiring:\n- Extreme torque output for heavy-load starting and operation\n- Reliable performance in dusty, wet, vibration-prone, or high-temperature environments\n- Long service intervals with minimal maintenance requirements\n- Consistent operation under continuous heavy-duty cycling\n- Integration into large-scale hydraulic systems with high flow demands\n\n## Installation & Maintenance Guide\n\n**Pre-Installation Checklist:**\n1. Verify motor specifications match system requirements (displacement, pressure, flow)\n2. Inspect all ports for cleanliness, damage, or contamination\n3. Check mounting surface flatness and alignment (critical for large motors)\n4. Ensure proper filtration (10 micron or finer recommended for this size)\n5. Confirm hydraulic fluid type, viscosity rating, and cleanliness level\n6. Prepare all fittings, hoses, adapters, and mounting hardware\n7. Verify adequate cooling capacity for expected duty cycle\n\n**Installation Procedure:**\n1. Clean all connection surfaces thoroughly with approved solvent\n2. Mount motor securely using specified torque values (follow manufacturer guidelines)\n3. Connect hydraulic lines ensuring proper port identification (P, T, A, B)\n4. Install case drain line to highest point in system (critical for large motors)\n5. Bleed air completely from system before full-pressure operation\n6. Check rotation direction matches application requirement (verify before full load)\n7. Perform initial startup at low pressure/speed with no load\n8. Gradually increase to normal operating conditions over 30+ minutes\n9. Monitor temperatures, pressures, and noise levels during break-in period\n\n**Routine Maintenance Schedule:**\n- **Daily:** Visual inspection for leaks, unusual noise, vibration, or temperature anomalies\n- **Weekly:** Check fluid level, condition, and temperature; inspect filter indicators\n- **Monthly:** Verify operating pressures, temperatures, and case drain flow\n- **Quarterly:** Replace hydraulic filters, check hose conditions, inspect mounting hardware\n- **Semi-Annually:** Comprehensive fluid analysis, seal inspection, bearing condition check\n- **Annually:** Complete system flush, fluid change, and thorough inspection\n- **As Needed:** Vibration analysis, thermal imaging, oil sampling for predictive maintenance\n\n**Common Troubleshooting:**\n- Low Performance: Check filter restriction, fluid viscosity, internal leakage, charge pump output\n- Overheating: Verify cooling system capacity, check for excessive bypass, review duty cycle\n- Noise/Vibration: Inspect for cavitation, air ingestion, worn bearings, misalignment\n- External Leakage: Replace seals, check fitting tightness, verify case drain line routing\n- Starting Difficulty: Verify charge pressure, check pilot system, inspect control valves\n\n## MKS Hydraulic Advantages\n\n**Quality Commitment:**\n- Direct partnership with leading manufacturers ensures genuine OEM quality\n- Every product undergoes MKS Hydraulic's additional quality verification process\n- Only new, original equipment - absolutely no refurbished or reconditioned units\n- Full traceability with serial number documentation and birth certificates\n- Comprehensive warranty coverage backed by manufacturer support\n\n**After-Sales Service:**\n- Dedicated technical support team with extensive experience in large hydraulic systems\n- 24/7 customer service hotline for urgent inquiries and emergency support\n- Comprehensive spare parts inventory for quick repairs and minimal downtime\n- On-site technical assistance available for complex installations and troubleshooting\n- Multi-language support for international customers worldwide\n- Application engineering support for system integration and optimization\n\n**Delivery & Lead Time:**\n- Strategic stock availability for immediate shipment on common configurations\n- Standard orders: 5-10 business days delivery worldwide (larger units require special handling)\n- Express shipping options available (DHL, FedEx, UPS, sea freight)\n- Real-time order tracking and status updates throughout the shipping process\n- Consolidated shipping for bulk orders to reduce costs\n- Custom crating and packaging for international shipment protection\n\n**Warranty Coverage:**\n- **Standard Warranty:** 12 months from date of delivery\n- **Extended Warranty:** Available up to 24 months for qualified industrial applications\n- Warranty covers manufacturing defects and premature failures under normal use\n- Quick claim processing with replacement or repair options\n- No-hassle warranty claims with professional handling and fast resolution\n- Optional extended service contracts available for critical applications\n\n**Additional Value-Added Services:**\n- Custom labeling and packaging options for OEM requirements\n- Technical documentation, CAD drawings, and integration guides available\n- Application engineering support for custom system design and optimization\n- Training programs for maintenance personnel on large hydraulic systems\n- Flexible payment terms for established customers and bulk orders\n- Trade assurance and secure transaction protection for international buyers\n- Pre-shipment inspection and testing reports available upon request\n\n**Why Choose MKS Hydraulic?**\nWith over 15 years of experience in the hydraulic industry, MKS Hydraulic has built an unmatched reputation for reliability, quality, and customer satisfaction in the heavy-duty hydraulic market. Our commitment to excellence extends beyond product supply - we partner with our customers to ensure optimal performance throughout the entire product lifecycle. From initial selection through installation, commissioning, operation, and long-term maintenance, our dedicated team is committed to your success.\n\nFor more information about the A2FM355 Hydraulic Axial Piston Fixed Motor or other products in our extensive catalog of heavy-duty hydraulic components, please contact our sales team or visit our website. We look forward to serving your hydraulic needs with the quality, professionalism, and expertise you deserve.
