महत्वपूर्ण जानकारी
न्यूनतम ऑर्डर मात्रा:1 Piece
शिपिंग विधि:快递, 空运, 陆运, 海运
उत्पाद विवरण
Product Overview
The OEM Rexroth Suitable Pump A2FO Series is a premium fixed displacement axial piston motor/pump manufactured by MKS Hydraulic for medium-duty industrial and mobile hydraulic applications requiring reliable performance under demanding conditions. Designed as a direct replacement for original Rexroth A2FO specifications while offering enhanced durability and cost-effectiveness, this versatile product line features a proven bent-axis design with fixed displacement, providing consistent torque output per unit of pressure input.
The A2FO series serves dual functionality — operating as both a hydraulic motor when driven by pressurized fluid and as a hydraulic pump when mechanically driven — providing maximum flexibility in system design and integration across construction machinery, agricultural equipment, material handling systems, and various industrial applications.
Key Performance Features
1. Fixed Displacement Design: Bent-axis configuration ensures constant displacement per revolution, providing predictable and stable performance across all operating conditions.
2. Wide Displacement Range: Available from A2FO5 (5cc/rev) to A2FO500 (500cc/rev) to match specific application torque requirements.
3. High Torque Density: Advanced piston design delivers maximum torque output relative to physical size and weight for compact installation.
4. High-Speed Capability: Optimized internal geometry supports smooth operation at speeds up to 3,750 RPM depending on model size.
5. Bi-Rotational Operation: Full bidirectional rotation capability enhances installation flexibility and system design options.
6. High Pressure Rating: Continuous operation up to 400 bar (5,800 PSI) with peak capability of 450 bar (6,500 PSI).
7. Superior Efficiency: Precision-machined components achieve volumetric efficiency above 96% and overall efficiency exceeding 90%.
8. Multiple Port Options: Various port sizes available to match specific system requirements and minimize pressure losses.
9. Long Service Life: Premium bearing systems and wear-resistant materials ensure extended operational lifespan even under severe duty cycles.
10. Compact Installation: Standardized mounting flanges and shaft dimensions ensure easy retrofit and replacement of existing units.
Quality Control & Testing Process
MKS Hydraulic implements rigorous quality assurance protocols:
- Material Certification: Spectrometric analysis on all critical alloy steel components with full batch traceability
- Precision Machining: Multi-axis CNC machining centers maintain tolerances within ±0.003mm for critical surfaces
- Cleanroom Assembly: ISO Class 7 controlled environment prevents particulate contamination
- Dimensional Verification: CMM inspection verifies all critical dimensions against OEM specifications
- Pressure Endurance: Every unit tested at 1.25x rated pressure for minimum 30 minutes
- Performance Mapping: Flow, torque, efficiency, and temperature characterized across full operating range
- Leak Integrity: Helium mass spectrometry leak detection at maximum rated pressure
- Final Audit: Complete visual, dimensional, and functional verification before shipment
- Precision Machining: Multi-axis CNC machining centers maintain tolerances within ±0.003mm for critical surfaces
- Cleanroom Assembly: ISO Class 7 controlled environment prevents particulate contamination
- Dimensional Verification: CMM inspection verifies all critical dimensions against OEM specifications
- Pressure Endurance: Every unit tested at 1.25x rated pressure for minimum 30 minutes
- Performance Mapping: Flow, torque, efficiency, and temperature characterized across full operating range
- Leak Integrity: Helium mass spectrometry leak detection at maximum rated pressure
- Final Audit: Complete visual, dimensional, and functional verification before shipment
ISO 9001:2015 certified; CE marked for European market compliance.
Application Scenarios & Industries
Construction Equipment:
- Excavator travel, swing, and attachment drive motors
- Crawler crane winch and slewing drives
- Paver screed drive systems
- Concrete mixer truck drum drives
- Mini excavator propulsion systems
- Excavator travel, swing, and attachment drive motors
- Crawler crane winch and slewing drives
- Paver screed drive systems
- Concrete mixer truck drum drives
- Mini excavator propulsion systems
Agricultural Machinery:
- Combine harvester header and threshing drives
- Tractor PTO and implement hydraulics
- Forage harvester feed roll systems
- Self-propelled sprayer wheel and boom drives
- Baler and wrapper hydraulic systems
- Combine harvester header and threshing drives
- Tractor PTO and implement hydraulics
- Forage harvester feed roll systems
- Self-propelled sprayer wheel and boom drives
- Baler and wrapper hydraulic systems
Industrial Processing:
- Plastic injection molding machine clamp and injection drives
- Metal forming press auxiliary systems
- Test stand and simulation equipment
- Conveyor belt tensioning and tracking drives
- Wind turbine pitch control systems
- Plastic injection molding machine clamp and injection drives
- Metal forming press auxiliary systems
- Test stand and simulation equipment
- Conveyor belt tensioning and tracking drives
- Wind turbine pitch control systems
Material Handling:
- Forklift mast tilt and side-shift motors
- Reach stacker and container handler wheel drives
- Stacker crane hoist and traverse motors
- Automated warehouse retrieval shuttles
- Mobile elevating work platform drive motors
- Forklift mast tilt and side-shift motors
- Reach stacker and container handler wheel drives
- Stacker crane hoist and traverse motors
- Automated warehouse retrieval shuttles
- Mobile elevating work platform drive motors
Marine Applications:
- Deck crane winch and slewing drives
- Anchor handling tug boat deck machinery
- Fishing vessel net reel drives
- Offshore platform auxiliary equipment
- Deck crane winch and slewing drives
- Anchor handling tug boat deck machinery
- Fishing vessel net reel drives
- Offshore platform auxiliary equipment
Usage & Maintenance Guidelines
Installation Requirements:
1. Verify mounting surface flatness within 0.05mm TIR to prevent housing distortion
2. Check shaft alignment using dial indicator; max allowable runout 0.03mm TIR
3. Use only specified mounting bolts with correct torque values and thread locker where specified
4. Install pressure relief valve set to 110% of maximum operating pressure as safety protection
5. Confirm reservoir capacity provides minimum 3x pump/motor flow rate per minute for adequate cooling
6. Select hydraulic fluid meeting ISO VG 46 specification unless otherwise specified by OEM
7. Install return line filter with 10 micron absolute rating minimum to protect internal components
8. Provide case drain line sized for maximum leakage flow plus 50% safety margin
1. Verify mounting surface flatness within 0.05mm TIR to prevent housing distortion
2. Check shaft alignment using dial indicator; max allowable runout 0.03mm TIR
3. Use only specified mounting bolts with correct torque values and thread locker where specified
4. Install pressure relief valve set to 110% of maximum operating pressure as safety protection
5. Confirm reservoir capacity provides minimum 3x pump/motor flow rate per minute for adequate cooling
6. Select hydraulic fluid meeting ISO VG 46 specification unless otherwise specified by OEM
7. Install return line filter with 10 micron absolute rating minimum to protect internal components
8. Provide case drain line sized for maximum leakage flow plus 50% safety margin
Initial Startup Procedure:
1. Fill case drain port with clean hydraulic oil before first operation to pre-lubricate internals
2. Crack open suction line connection to allow air bleeding during initial rotation cycle
3. Start prime mover at idle speed with system in neutral/no-load condition
4. Operate at low speed (200-300 RPM) for 10-15 minutes while monitoring case temperature rise
5. Gradually increase speed to normal operating range over 5-minute period
6. Check all external connections for leakage at full operating pressure after warm-up
7. Record baseline operating temperatures, pressures, noise levels for future reference
1. Fill case drain port with clean hydraulic oil before first operation to pre-lubricate internals
2. Crack open suction line connection to allow air bleeding during initial rotation cycle
3. Start prime mover at idle speed with system in neutral/no-load condition
4. Operate at low speed (200-300 RPM) for 10-15 minutes while monitoring case temperature rise
5. Gradually increase speed to normal operating range over 5-minute period
6. Check all external connections for leakage at full operating pressure after warm-up
7. Record baseline operating temperatures, pressures, noise levels for future reference
Maintenance Schedule:
Daily: Visual leak check, oil level, temperature monitoring
Weekly: Filter condition inspection, fastener torque verification
Monthly: Oil sampling analysis, seal external inspection
Quarterly: Full system inspection, filter element replacement
Annually: Major overhaul recommended per 4,000-6,000 operating hours
Daily: Visual leak check, oil level, temperature monitoring
Weekly: Filter condition inspection, fastener torque verification
Monthly: Oil sampling analysis, seal external inspection
Quarterly: Full system inspection, filter element replacement
Annually: Major overhaul recommended per 4,000-6,000 operating hours
Precautions for use:
1. Do not knock when installing the coupling; 2. Pump casing shall be filled with oil;
3. Exhaust the air in the suction pipe; 4. Check the filter;
5. Check the cleanness of oil; 6. Check the oil level;
7. Check whether the pump direction is correct; 8. Connect the oil drain pipe with the highest T-port.
1. Do not knock when installing the coupling; 2. Pump casing shall be filled with oil;
3. Exhaust the air in the suction pipe; 4. Check the filter;
5. Check the cleanness of oil; 6. Check the oil level;
7. Check whether the pump direction is correct; 8. Connect the oil drain pipe with the highest T-port.
MKS Hydraulic Advantages
Quality Excellence:
- 15+ years specializing in Rexroth-compatible axial piston products
- State-of-the-art CNC manufacturing facility with precision inspection equipment
- ISO 9001:2015 certified quality management system
- Premium-grade materials from globally recognized suppliers
- 100% individual testing and certification before shipment
- Direct interchangeability with genuine Rexroth specifications
- 15+ years specializing in Rexroth-compatible axial piston products
- State-of-the-art CNC manufacturing facility with precision inspection equipment
- ISO 9001:2015 certified quality management system
- Premium-grade materials from globally recognized suppliers
- 100% individual testing and certification before shipment
- Direct interchangeability with genuine Rexroth specifications
After-Sales Service:
- 24/7 multilingual technical support via phone, email, video conference
- Comprehensive installation manuals included with each shipment
- Remote diagnostic support via video consultation available
- Global authorized service technician network for on-site assistance
- Genuine spare parts stocked at multiple distribution centers for emergency delivery within 48-72 hours
- 24/7 multilingual technical support via phone, email, video conference
- Comprehensive installation manuals included with each shipment
- Remote diagnostic support via video consultation available
- Global authorized service technician network for on-site assistance
- Genuine spare parts stocked at multiple distribution centers for emergency delivery within 48-72 hours
Delivery Assurance:
- Standard catalog models: 10-18 business days from order confirmation to shipment
- Custom configured units: 20-35 business days depending on specification complexity
- Express production priority available for urgent breakdown situations
- Real-time online order tracking with automated status notifications
- Flexible shipping options including air freight, ocean freight, express courier
- Standard catalog models: 10-18 business days from order confirmation to shipment
- Custom configured units: 20-35 business days depending on specification complexity
- Express production priority available for urgent breakdown situations
- Real-time online order tracking with automated status notifications
- Flexible shipping options including air freight, ocean freight, express courier
Warranty Coverage:
- 18-month comprehensive warranty commencing from delivery date
- No operating hour limitation within the initial warranty period
- Free-of-charge replacement for any verified manufacturing defect or material failure
- Prorated coverage policy for wear components after initial warranty expiration
- Optional extended warranty programs available up to 36 months
- 18-month comprehensive warranty commencing from delivery date
- No operating hour limitation within the initial warranty period
- Free-of-charge replacement for any verified manufacturing defect or material failure
- Prorated coverage policy for wear components after initial warranty expiration
- Optional extended warranty programs available up to 36 months
Choose MKS Hydraulic for your A2FO series needs — German engineering standards, Chinese manufacturing efficiency, competitive pricing, and world-class customer support ensuring maximum uptime and minimum total cost of ownership.
