Hydraulic Open Circuit Excavator Spare Part Accessory Rexroth Axial Piston Variable High Pressure Pump Hydraulic Parts Pvxs180 Piston Hydraulic Pump
Hydraulic Open Circuit Excavator Spare Part Accessory Rexroth Axial Piston Variable High Pressure Pump Hydraulic Parts Pvxs180 Piston Hydraulic Pump

Hydraulic Open Circuit Excavator Spare Part Accessory Rexroth Axial Piston Variable High Pressure Pump Hydraulic Parts Pvxs180 Piston Hydraulic Pump

MOQ:
1 Piece
Versand:
快递, 空运, 陆运, 海运
Klicken Sie für Details:
Produktdetails
FAQ
Wesentliche Details
MOQ:1 Piece
Versand:快递, 空运, 陆运, 海运
Produkteinführung
Product Introduction:
The Hydraulic Open Circuit Excavator Spare Part Accessory Rexroth Axial Piston Variable High Pressure Pump PVXS180 is a premium hydraulic component designed for demanding construction and industrial applications. This variable displacement axial piston pump delivers exceptional performance with precise flow control and high-pressure operation capabilities for excavators and heavy machinery.

Product Performance Features:
- Variable displacement design for optimized energy efficiency and flow control
- High-pressure operation capability up to rated specifications
- Precision-machined axial piston mechanism for superior performance
- Robust construction ensuring extended service life in harsh environments
- Excellent volumetric and mechanical efficiency exceeding industry standards
- Low noise operation with minimal vibration levels
- Compatible with mineral-based and synthetic hydraulic fluids
- Advanced sealing technology for leak-free performance
- Quick response time for dynamic load changes
- Temperature range: -20°C to +80°C operating conditions

Quality Inspection and Testing Process:
Each hydraulic pump undergoes rigorous quality verification procedures:
- Dimensional accuracy inspection using precision CMM measuring equipment
- Pressure testing at 1.5x maximum working pressure for safety margin verification
- Flow rate calibration under various load and speed conditions
- Efficiency testing to verify volumetric and mechanical performance ratings
- Endurance cycle testing for 500+ continuous operating hours
- Leakage testing to ensure complete seal integrity under maximum pressure
- Noise level measurement and vibration analysis for smooth operation
- Material hardness and composition verification with certified reports
- Surface finish inspection meeting international standards
- Final visual inspection with comprehensive quality documentation and test certificates

Application Scenarios and Industries:
- Construction machinery: excavators, bulldozers, wheel loaders, backhoe loaders, cranes
- Agricultural equipment: tractors, harvesters, balers, sprayers, irrigation systems
- Industrial manufacturing: hydraulic presses, injection molding machines, CNC equipment
- Material handling: forklifts, conveyor systems, lifting platforms, mobile cranes
- Mobile hydraulics: trucks, specialized vehicles, marine deck equipment
- Mining equipment: drilling rigs, crushing machines, screening equipment, conveyors
- Energy sector: wind turbine pitch systems, oil and gas pumping equipment
- Municipal equipment: garbage trucks, street sweepers, snow removal vehicles
- Forestry machinery: harvesters, processors, skidders, log loaders

Usage and Maintenance Guide:
Installation Precautions: Ensure proper shaft alignment with drive motor using dial indicator; avoid knocking during coupling installation to prevent bearing damage and shaft misalignment; use flexible coupling to absorb minor misalignments; check mounting surface flatness
System Priming: Fill pump casing with recommended hydraulic oil before initial startup to prevent dry running and cavitation damage; rotate shaft manually several times to distribute oil evenly
Air Removal: Completely exhaust air from suction pipe and entire hydraulic system to prevent cavitation, noise, and reduced efficiency; bleed system at highest points until oil flows without bubbles
Filtration Requirements: Install appropriate suction filters (100-150 micron) and pressure filters (10-25 micron); check filter condition regularly and replace as needed; monitor differential pressure indicators; maintain cleanliness code ISO 4406 18/16/13 or better
Oil Quality Management: Use clean hydraulic oil with correct viscosity grade (ISO VG 32-68 based on operating temperature); monitor contamination levels using particle counters; change oil per manufacturer recommendations; maintain NAS 1638 Class 8 or better
Oil Level Monitoring: Maintain proper oil level in reservoir between minimum and maximum marks; check regularly during operation; top up with filtered oil only; inspect for contamination or water ingress
Rotation Verification: Confirm correct pump rotation direction (clockwise when viewed from shaft end) before connecting to drive system; incorrect rotation causes immediate catastrophic damage; verify motor wiring before startup
Drainage Configuration: Connect case drain line to highest T-port for optimal drainage and cooling; ensure drain line returns to tank below oil level; size drain line per manufacturer specifications; avoid restrictions in drain line
Regular Maintenance: Check mounting bolts torque monthly (retighten if necessary); inspect shaft seals for leaks quarterly; replace wear components per service schedule; monitor pump performance parameters (pressure, flow, temperature, noise); keep maintenance records

MKS Hydraulic Advantages:
Quality Excellence: All products manufactured under ISO 9001:2015 certified quality management system with strict adherence to international hydraulic standards. Strict material selection with certified steel suppliers providing traceable material certificates for all critical components including pistons, swash plates, and valve plates. Precision machining using state-of-the-art CNC equipment with tolerances within 0.01mm ensuring perfect fit and function. Comprehensive quality control at every production stage including incoming inspection, in-process verification, and final testing with documented results. Third-party quality audits conducted annually by accredited organizations. All pumps dynamically tested and calibrated before shipment with performance curves provided.

After-Sales Service: Professional technical support team available 24/7 via phone (+86-400-XXX-XXXX), email (support@mkshydraulic.com), WeChat, and online chat platform. Installation guidance and commissioning assistance provided by certified field engineers with extensive hydraulic system experience in construction and industrial applications. Troubleshooting support with rapid response time (within 2 hours for urgent issues, 24 hours for standard inq

Ausgewählte Produkte

Verfeinert: Sammlung von Elektronik.
Hinterlassen Sie Ihre Daten und
Wir werden uns bei Ihnen melden.
Telefon
WhatsApp
WeChat